589689.xyz

Udemy - Build a Lego Helicopter in SolidWorks 3D CAD

  • 收录时间:2022-02-02 01:55:45
  • 文件大小:3GB
  • 下载次数:1
  • 最近下载:2022-02-02 01:55:45
  • 磁力链接:
立即下载 复制链接

文件列表

  1. 19. Stage 22 Finishing the Helicopter and Adding Mechanical Mates/2. Stage 22 Finishing the Helicopter and Adding Mechanical Mates.mp4 146MB
  2. 10. Stage 9 Making the Cockpit Area/1. Create the Right Angle with Curve Part.mp4 137MB
  3. 15. Stages 16 and 17 Making the Tail Rotor Section/2. Creating the Tail Fairing Part.mp4 133MB
  4. 2. Stage 1 Building the Fuselage Base/2. Making the Right Angle Beam - Part 1.mp4 123MB
  5. 16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/2. Creating the Tail Rotor Part.mp4 94MB
  6. 12. Stage 11 Make the Upper Fuselage/2. Stage 11 Make the Upper Fuselage Section, and Troubleshooting.mp4 93MB
  7. 2. Stage 1 Building the Fuselage Base/3. Making the Right Angle Beam - Part 2.mp4 91MB
  8. 2. Stage 1 Building the Fuselage Base/6. Creating the first Subassembly.mp4 91MB
  9. 14. Stages 13, 14 and 15 Building Up the Other Side of the Helicopter/1. Stages 13, 14 and 15 Building Up the Other Side of the Helicopter.mp4 89MB
  10. 12. Stage 11 Make the Upper Fuselage/1. Create the Four Beam with Extension Part.mp4 85MB
  11. 3. Stage 2 Expanding the Fuselage/2. Making the Right Angle Beam.mp4 85MB
  12. 2. Stage 1 Building the Fuselage Base/1. Creating the Axle.mp4 82MB
  13. 19. Stage 22 Finishing the Helicopter and Adding Mechanical Mates/1. Making the Main Rotor Blades.mp4 74MB
  14. 13. Stage 12 Create the Main Rotor/2. Making the Axle Joint Part.mp4 70MB
  15. 16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/3. Making the Half Bevel Gear Part.mp4 69MB
  16. 3. Stage 2 Expanding the Fuselage/4. Making Stage 2 - The Fuselage.mp4 67MB
  17. 7. Stage 6 Adding the Tail Rotor Transmission/2. Making the Large Bush Part.mp4 66MB
  18. 4. Stage 3 Adding to the Fuselage/2. Making the Cross Block Connector.mp4 65MB
  19. 2. Stage 1 Building the Fuselage Base/4. Building the Friction Pin.mp4 63MB
  20. 2. Stage 1 Building the Fuselage Base/5. Making the Pin with Bore.mp4 62MB
  21. 17. Stage 20 Starting the Skids/1. Creating the Pin with Large Bush Part.mp4 62MB
  22. 4. Stage 3 Adding to the Fuselage/3. Building Stage 3 - the Upper Fuselage.mp4 58MB
  23. 11. Stage 10 Building Up the Cockpit Rear Section/3. Stage 10 Make the Main Rotor Hub Section.mp4 57MB
  24. 13. Stage 12 Create the Main Rotor/3. Stage 12 Adding the Main Rotor Shaft.mp4 56MB
  25. 4. Stage 3 Adding to the Fuselage/1. Creating the Long Pin Part.mp4 49MB
  26. 5. Stage 4 Building the Tail Section/1. Building the 7-Long Beam.mp4 48MB
  27. 7. Stage 6 Adding the Tail Rotor Transmission/4. Stage 6 Adding the Tail Rotor Transmission.mp4 47MB
  28. 18. Stage 21 Finishing the Skids and Tail/2. Stage 21 Finishing the Skids and Tail.mp4 47MB
  29. 7. Stage 6 Adding the Tail Rotor Transmission/3. Making the Bevel Gear.mp4 46MB
  30. 16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/4. Stages 18 and 19 Adding the Tail Section.mp4 46MB
  31. 18. Stage 21 Finishing the Skids and Tail/1. Making the Light Stud and Pin with Stud Parts.mp4 45MB
  32. 11. Stage 10 Building Up the Cockpit Rear Section/1. Make the Three-Long Cross Block Part.mp4 43MB
  33. 16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/1. Making the Pin with Axle Part.mp4 41MB
  34. 8. Stage 7 Building Up the Helicopter Body/2. Stage 7 Building Up the Main Rotor Hub.mp4 40MB
  35. 9. Stage 8 Adding the Helicopter's Nose Section/1. Stage 8 Adding the Helicopter's Nose Section.mp4 39MB
  36. 17. Stage 20 Starting the Skids/2. Stage 20 Starting the Skids.mp4 36MB
  37. 5. Stage 4 Building the Tail Section/3. Stage 4 Creating the Tail Boom.mp4 33MB
  38. 15. Stages 16 and 17 Making the Tail Rotor Section/3. Stages 16 and 17 Making the Tail Section.mp4 32MB
  39. 8. Stage 7 Building Up the Helicopter Body/1. Creating the Two Block with Axle Holes.mp4 30MB
  40. 11. Stage 10 Building Up the Cockpit Rear Section/2. Create the Axle with Bore Part.mp4 29MB
  41. 6. Stage 5 Adding the Tail Rotor Transmission Housing/1. Making the One-Sided Pin with Bore.mp4 29MB
  42. 3. Stage 2 Expanding the Fuselage/3. Creating the Small Bush Part.mp4 28MB
  43. 3. Stage 2 Expanding the Fuselage/1. Creating a Longer Axle Using Configurations.mp4 28MB
  44. 15. Stages 16 and 17 Making the Tail Rotor Section/1. Making the 2-Long Axle Part.mp4 28MB
  45. 1. Introduction/1.1 Lego Helicopter Exercise Files - UNZIP TO USE.zip 25MB
  46. 6. Stage 5 Adding the Tail Rotor Transmission Housing/2. Stage 5 Adding the Tail Rotor Transmission Housing.mp4 25MB
  47. 1. Introduction/1. Welcome to the Course.mp4 25MB
  48. 5. Stage 4 Building the Tail Section/2. Making the 5-Long Beam.mp4 22MB
  49. 10. Stage 9 Making the Cockpit Area/2. Stage 9 Create the Cockpit Side.mp4 14MB
  50. 7. Stage 6 Adding the Tail Rotor Transmission/1. Creating the 9-Long Axle Part.mp4 13MB
  51. 1. Introduction/2. How to Use This Course.mp4 12MB
  52. 13. Stage 12 Create the Main Rotor/1. Creating the 7-Long Axle Part.mp4 10MB
  53. .pad/1048400 1024KB
  54. .pad/1048130 1024KB
  55. .pad/1046716 1022KB
  56. .pad/1046534 1022KB
  57. .pad/1046415 1022KB
  58. .pad/1045036 1021KB
  59. .pad/1044487 1020KB
  60. .pad/1044409 1020KB
  61. .pad/1044331 1020KB
  62. .pad/1043852 1019KB
  63. .pad/1043655 1019KB
  64. .pad/1043652 1019KB
  65. .pad/1043542 1019KB
  66. .pad/1043525 1019KB
  67. .pad/1043515 1019KB
  68. .pad/1043020 1019KB
  69. .pad/1042422 1018KB
  70. .pad/1042257 1018KB
  71. .pad/1042236 1018KB
  72. .pad/1041874 1017KB
  73. .pad/1041863 1017KB
  74. .pad/1041581 1017KB
  75. .pad/1041527 1017KB
  76. .pad/1040814 1016KB
  77. .pad/1040298 1016KB
  78. .pad/1040279 1016KB
  79. .pad/1040183 1016KB
  80. .pad/1040071 1016KB
  81. .pad/1039981 1016KB
  82. .pad/1039729 1015KB
  83. .pad/1038906 1015KB
  84. .pad/1038301 1014KB
  85. .pad/1037916 1014KB
  86. .pad/1037418 1013KB
  87. .pad/1037020 1013KB
  88. .pad/1036590 1012KB
  89. .pad/1036565 1012KB
  90. .pad/1036431 1012KB
  91. .pad/1036214 1012KB
  92. .pad/1035966 1012KB
  93. .pad/1035687 1011KB
  94. .pad/1035489 1011KB
  95. .pad/1034917 1011KB
  96. .pad/1033912 1010KB
  97. .pad/1033661 1009KB
  98. .pad/1032537 1008KB
  99. .pad/1031106 1007KB
  100. .pad/1030039 1006KB
  101. .pad/1029555 1005KB
  102. .pad/1028007 1004KB
  103. .pad/1024681 1001KB
  104. .pad/1024160 1000KB
  105. .pad/1023554 1000KB
  106. .pad/1008808 985KB
  107. .pad/1001410 978KB
  108. .pad/986653 964KB
  109. .pad/982000 959KB
  110. .pad/944179 922KB
  111. .pad/939386 917KB
  112. .pad/918644 897KB
  113. .pad/917881 896KB
  114. .pad/892795 872KB
  115. .pad/886144 865KB
  116. .pad/877839 857KB
  117. .pad/872437 852KB
  118. .pad/859728 840KB
  119. .pad/828941 810KB
  120. .pad/818166 799KB
  121. .pad/752147 735KB
  122. .pad/747115 730KB
  123. .pad/725987 709KB
  124. .pad/715269 699KB
  125. .pad/696465 680KB
  126. .pad/665153 650KB
  127. .pad/643474 628KB
  128. .pad/633667 619KB
  129. .pad/619198 605KB
  130. .pad/557591 545KB
  131. .pad/548710 536KB
  132. .pad/543193 530KB
  133. .pad/538448 526KB
  134. .pad/536794 524KB
  135. .pad/532063 520KB
  136. .pad/528924 517KB
  137. .pad/523002 511KB
  138. .pad/518710 507KB
  139. .pad/508981 497KB
  140. .pad/495369 484KB
  141. .pad/476202 465KB
  142. .pad/443322 433KB
  143. .pad/406854 397KB
  144. .pad/354931 347KB
  145. .pad/299039 292KB
  146. .pad/280063 273KB
  147. .pad/267455 261KB
  148. .pad/249933 244KB
  149. .pad/222159 217KB
  150. .pad/137426 134KB
  151. .pad/129691 127KB
  152. .pad/121330 118KB
  153. .pad/104344 102KB
  154. .pad/86702 85KB
  155. .pad/83594 82KB
  156. 2. Stage 1 Building the Fuselage Base/2. Making the Right Angle Beam - Part 1.srt 24KB
  157. 10. Stage 9 Making the Cockpit Area/1. Create the Right Angle with Curve Part.srt 24KB
  158. 15. Stages 16 and 17 Making the Tail Rotor Section/2. Creating the Tail Fairing Part.srt 23KB
  159. 16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/2. Creating the Tail Rotor Part.srt 20KB
  160. 19. Stage 22 Finishing the Helicopter and Adding Mechanical Mates/2. Stage 22 Finishing the Helicopter and Adding Mechanical Mates.srt 19KB
  161. 2. Stage 1 Building the Fuselage Base/1. Creating the Axle.srt 18KB
  162. 2. Stage 1 Building the Fuselage Base/6. Creating the first Subassembly.srt 17KB
  163. 3. Stage 2 Expanding the Fuselage/2. Making the Right Angle Beam.srt 16KB
  164. 12. Stage 11 Make the Upper Fuselage/1. Create the Four Beam with Extension Part.srt 15KB
  165. 2. Stage 1 Building the Fuselage Base/3. Making the Right Angle Beam - Part 2.srt 14KB
  166. 12. Stage 11 Make the Upper Fuselage/2. Stage 11 Make the Upper Fuselage Section, and Troubleshooting.srt 13KB
  167. 19. Stage 22 Finishing the Helicopter and Adding Mechanical Mates/1. Making the Main Rotor Blades.srt 13KB
  168. 2. Stage 1 Building the Fuselage Base/4. Building the Friction Pin.srt 13KB
  169. 2. Stage 1 Building the Fuselage Base/5. Making the Pin with Bore.srt 12KB
  170. 17. Stage 20 Starting the Skids/1. Creating the Pin with Large Bush Part.srt 12KB
  171. 3. Stage 2 Expanding the Fuselage/4. Making Stage 2 - The Fuselage.srt 12KB
  172. 4. Stage 3 Adding to the Fuselage/2. Making the Cross Block Connector.srt 12KB
  173. 7. Stage 6 Adding the Tail Rotor Transmission/2. Making the Large Bush Part.srt 12KB
  174. 4. Stage 3 Adding to the Fuselage/1. Creating the Long Pin Part.srt 11KB
  175. 13. Stage 12 Create the Main Rotor/2. Making the Axle Joint Part.srt 11KB
  176. 14. Stages 13, 14 and 15 Building Up the Other Side of the Helicopter/1. Stages 13, 14 and 15 Building Up the Other Side of the Helicopter.srt 10KB
  177. 16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/3. Making the Half Bevel Gear Part.srt 10KB
  178. 4. Stage 3 Adding to the Fuselage/3. Building Stage 3 - the Upper Fuselage.srt 9KB
  179. 11. Stage 10 Building Up the Cockpit Rear Section/3. Stage 10 Make the Main Rotor Hub Section.srt 9KB
  180. 5. Stage 4 Building the Tail Section/1. Building the 7-Long Beam.srt 8KB
  181. 18. Stage 21 Finishing the Skids and Tail/1. Making the Light Stud and Pin with Stud Parts.srt 8KB
  182. .pad/8432 8KB
  183. 7. Stage 6 Adding the Tail Rotor Transmission/3. Making the Bevel Gear.srt 8KB
  184. 3. Stage 2 Expanding the Fuselage/1. Creating a Longer Axle Using Configurations.srt 8KB
  185. 13. Stage 12 Create the Main Rotor/3. Stage 12 Adding the Main Rotor Shaft.srt 8KB
  186. 11. Stage 10 Building Up the Cockpit Rear Section/1. Make the Three-Long Cross Block Part.srt 8KB
  187. 16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/4. Stages 18 and 19 Adding the Tail Section.srt 7KB
  188. 16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/1. Making the Pin with Axle Part.srt 7KB
  189. 6. Stage 5 Adding the Tail Rotor Transmission Housing/1. Making the One-Sided Pin with Bore.srt 7KB
  190. 8. Stage 7 Building Up the Helicopter Body/2. Stage 7 Building Up the Main Rotor Hub.srt 7KB
  191. 9. Stage 8 Adding the Helicopter's Nose Section/1. Stage 8 Adding the Helicopter's Nose Section.srt 6KB
  192. 7. Stage 6 Adding the Tail Rotor Transmission/4. Stage 6 Adding the Tail Rotor Transmission.srt 6KB
  193. 18. Stage 21 Finishing the Skids and Tail/2. Stage 21 Finishing the Skids and Tail.srt 6KB
  194. 15. Stages 16 and 17 Making the Tail Rotor Section/1. Making the 2-Long Axle Part.srt 5KB
  195. 8. Stage 7 Building Up the Helicopter Body/1. Creating the Two Block with Axle Holes.srt 5KB
  196. 11. Stage 10 Building Up the Cockpit Rear Section/2. Create the Axle with Bore Part.srt 5KB
  197. 17. Stage 20 Starting the Skids/2. Stage 20 Starting the Skids.srt 5KB
  198. 1. Introduction/2. How to Use This Course.srt 5KB
  199. 5. Stage 4 Building the Tail Section/3. Stage 4 Creating the Tail Boom.srt 5KB
  200. 15. Stages 16 and 17 Making the Tail Rotor Section/3. Stages 16 and 17 Making the Tail Section.srt 5KB
  201. 3. Stage 2 Expanding the Fuselage/3. Creating the Small Bush Part.srt 4KB
  202. 6. Stage 5 Adding the Tail Rotor Transmission Housing/2. Stage 5 Adding the Tail Rotor Transmission Housing.srt 4KB
  203. 5. Stage 4 Building the Tail Section/2. Making the 5-Long Beam.srt 4KB
  204. 7. Stage 6 Adding the Tail Rotor Transmission/1. Creating the 9-Long Axle Part.srt 3KB
  205. 13. Stage 12 Create the Main Rotor/1. Creating the 7-Long Axle Part.srt 2KB
  206. 1. Introduction/1. Welcome to the Course.srt 2KB
  207. 10. Stage 9 Making the Cockpit Area/2. Stage 9 Create the Cockpit Side.srt 2KB
  208. .pad/1466 1KB
  209. GFXDomain.NET.txt 446B
  210. 19. Stage 22 Finishing the Helicopter and Adding Mechanical Mates/3. Optional Assignment - Use Your New Lego Parts to Create a New Assembly.html 176B
  211. iNFO.url 120B