589689.xyz

BLENDER Creating Jeep Gladiator Rubicon from A to Z

  • 收录时间:2023-04-29 23:57:36
  • 文件大小:83GB
  • 下载次数:1
  • 最近下载:2023-04-29 23:57:36
  • 磁力链接:
立即下载 复制链接

文件列表

  1. 3 - Resource/191 - Resource.part1.rar 900MB
  2. 2 - Modeling/38 - 038Modeling the wiper panel part 2.mp4 827MB
  3. 3 - Resource/191 - Resource.part2.rar 773MB
  4. 2 - Modeling/120 - 120Starting with the wheels part 2.mp4 765MB
  5. 2 - Modeling/103 - 103Starting with the truck bed door details.mp4 757MB
  6. 2 - Modeling/164 - 164Starting with the cargo roof front light base.mp4 756MB
  7. 2 - Modeling/78 - 078Starting with the rear bumper part 1.mp4 739MB
  8. 2 - Modeling/23 - 023Creating the Fender cover.mp4 725MB
  9. 2 - Modeling/10 - 010Modeling the Hood.mp4 715MB
  10. 2 - Modeling/62 - 062Starting with the rear left door.mp4 715MB
  11. 2 - Modeling/162 - 162Creating the cargo roof holder legs.mp4 711MB
  12. 2 - Modeling/79 - 079Modeling the rear bumper part 2.mp4 699MB
  13. 2 - Modeling/41 - 041Creating the Hood Hinge.mp4 694MB
  14. 2 - Modeling/135 - 135Modeling the front fender liner.mp4 684MB
  15. 2 - Modeling/77 - 077Creating the truck bed door handle.mp4 672MB
  16. 2 - Modeling/143 - 143Modeling the axel housing part 5.mp4 672MB
  17. 2 - Modeling/89 - 089Finishing the tail light.mp4 671MB
  18. 2 - Modeling/163 - 163Creating the cargo roof handle.mp4 664MB
  19. 2 - Modeling/155 - 155Finishing the cargo carrier.mp4 662MB
  20. 2 - Modeling/112 - 112Creating the hood vents pattern.mp4 659MB
  21. 2 - Modeling/56 - 056Creating the door handle.mp4 654MB
  22. 2 - Modeling/52 - 052Starting with the door part 2.mp4 649MB
  23. 2 - Modeling/190 - 190Tail light materials.mp4 648MB
  24. 2 - Modeling/150 - 150Creating cargo carrier above the truck bed.mp4 648MB
  25. 2 - Modeling/136 - 136Modeling the front fender liner part 2.mp4 647MB
  26. 2 - Modeling/142 - 142Starting the axel housing part 4.mp4 646MB
  27. 2 - Modeling/119 - 119Starting with the wheels part 1.mp4 642MB
  28. 2 - Modeling/108 - 108Starting with the windshield wipers.mp4 639MB
  29. 2 - Modeling/125 - 125Finishing the tire.mp4 638MB
  30. 2 - Modeling/144 - 144Prepering the axel housing for the subdivision surface part 6.mp4 632MB
  31. 2 - Modeling/159 - 159Modeling the doors side steps part 4.mp4 630MB
  32. 2 - Modeling/152 - 152Creating the cargo carrier above the truck bed part 3.mp4 618MB
  33. 2 - Modeling/59 - 059Modeling the rear windshield frame.mp4 618MB
  34. 2 - Modeling/49 - 049Completing the frame and creating the windshield glass.mp4 617MB
  35. 2 - Modeling/34 - 034Creating the windshield base panel.mp4 608MB
  36. 2 - Modeling/88 - 088Adding more details for the tail light.mp4 605MB
  37. 2 - Modeling/40 - 040Creating pattern for the wipers panel.mp4 605MB
  38. 2 - Modeling/71 - 071Starting with the truck bed.mp4 599MB
  39. 2 - Modeling/167 - 167Starting with the radiator and surrounding details.mp4 595MB
  40. 2 - Modeling/55 - 055Creating and editing the door hinges.mp4 594MB
  41. 2 - Modeling/48 - 048Starting with the windshield.mp4 586MB
  42. 2 - Modeling/66 - 066Starting with the roof part 2.mp4 586MB
  43. 2 - Modeling/122 - 122Modeling the tire part 2.mp4 586MB
  44. 2 - Modeling/14 - 014Starting with the front Bumper.mp4 585MB
  45. 2 - Modeling/158 - 158Modeling the doors side steps part 3.mp4 579MB
  46. 2 - Modeling/45 - 045Finishing the Hood Latch.mp4 575MB
  47. 2 - Modeling/4 - 004Creating the Grilles with the head lights.mp4 572MB
  48. 2 - Modeling/64 - 064Finishing the doors.mp4 572MB
  49. 2 - Modeling/63 - 063Fixing some shading issues and creating the door hinges bases.mp4 572MB
  50. 2 - Modeling/114 - 114Starting the Doors mirrors.mp4 571MB
  51. 2 - Modeling/35 - 035Creating the wiper base panel.mp4 569MB
  52. 2 - Modeling/100 - 100Finishing the right side of the truck bed.mp4 567MB
  53. 2 - Modeling/73 - 073Adding a bevel modifier to the truck bed and fix all the shading issues.mp4 566MB
  54. 2 - Modeling/110 - 110Putting the Windshield wipers in the place.mp4 565MB
  55. 2 - Modeling/15 - 015Starting with the front Bumper part 2.mp4 564MB
  56. 2 - Modeling/92 - 092Making some tweaks for the bed and creating bed rail cover plastic.mp4 561MB
  57. 2 - Modeling/24 - 024Adding details for the Fender cover.mp4 559MB
  58. 2 - Modeling/76 - 076Starting with truck bed door.mp4 553MB
  59. 2 - Modeling/139 - 139Starting with the Axel.mp4 549MB
  60. 2 - Modeling/51 - 051Starting with the front door.mp4 547MB
  61. 2 - Modeling/75 - 075Starting with the rear fender part 2.mp4 540MB
  62. 2 - Modeling/97 - 097Completing the left side of the truck bed.mp4 540MB
  63. 2 - Modeling/69 - 069Creating the front door glass and the rubber frame.mp4 535MB
  64. 2 - Modeling/67 - 067Adding Bevel to the sharp edges and creating the top panels.mp4 527MB
  65. 2 - Modeling/170 - 170Creating the Gladiator tex and use it on the body.mp4 525MB
  66. 2 - Modeling/146 - 146Adding more important details to the chassis and mirror them.mp4 519MB
  67. 2 - Modeling/153 - 153Adding more details for the cargo carrier part 4.mp4 519MB
  68. 2 - Modeling/9 - 009Creating the fender base.mp4 518MB
  69. 2 - Modeling/156 - 156Starting with the doors side steps.mp4 517MB
  70. 2 - Modeling/30 - 030Creating fender vents.mp4 516MB
  71. 2 - Modeling/140 - 140Starting with the Axel par 2.mp4 514MB
  72. 2 - Modeling/7 - 007Creating the headlight details part 2.mp4 512MB
  73. 2 - Modeling/148 - 148Creating the rear axle hinge.mp4 512MB
  74. 2 - Modeling/121 - 121Modeling the tire.mp4 510MB
  75. 2 - Modeling/174 - 174Creating the 4x4 and Rubicon text and apply it on the body.mp4 507MB
  76. 2 - Modeling/81 - 081Creating the foot step pattern.mp4 501MB
  77. 2 - Modeling/138 - 138Modeling the rear fender liner.mp4 501MB
  78. 2 - Modeling/96 - 096Blocking the left side of the bed.mp4 497MB
  79. 2 - Modeling/29 - 029Creating the reflector light.mp4 488MB
  80. 2 - Modeling/65 - 065Starting with the roof.mp4 488MB
  81. 2 - Modeling/5 - 005Adding the inner rims of the grilles and the pattern.mp4 486MB
  82. 2 - Modeling/132 - 132Adding details for the chassis.mp4 486MB
  83. 2 - Modeling/13 - 013Modeling the Hood Vents.mp4 484MB
  84. 2 - Modeling/22 - 022Starting with the fender.mp4 476MB
  85. 2 - Modeling/33 - 033Starting with the top area of the Fender.mp4 474MB
  86. 2 - Modeling/46 - 046making some changes for the Hood and the Hood latch.mp4 473MB
  87. 2 - Modeling/58 - 058Focusing on the back side of the cabin.mp4 473MB
  88. 2 - Modeling/133 - 133Adding more details for the chassis part2.mp4 471MB
  89. 2 - Modeling/98 - 098Finishing the left side of the truck bed.mp4 470MB
  90. 2 - Modeling/126 - 126Creating the Jeep logo in the middle of the wheel.mp4 470MB
  91. 2 - Modeling/85 - 085Modeling the trailer plug part 1.mp4 468MB
  92. 2 - Modeling/109 - 109Creating the windshield wipers rubber holder.mp4 465MB
  93. 2 - Modeling/37 - 037Modeling the wiper panel.mp4 463MB
  94. 2 - Modeling/44 - 044Starting with the Hood Latch part 1.mp4 461MB
  95. 2 - Modeling/93 - 093Truck bed tweaking part 2.mp4 461MB
  96. 2 - Modeling/72 - 072Starting with the truck bed part 1.mp4 459MB
  97. 2 - Modeling/87 - 087Starting with the tail light.mp4 457MB
  98. 2 - Modeling/91 - 091Modeling the bed interior part 2.mp4 456MB
  99. 2 - Modeling/147 - 147Making some tweaking for the axel and create the jeep logo.mp4 452MB
  100. 2 - Modeling/39 - 039Finishing the modeling of the wipers panel.mp4 447MB
  101. 2 - Modeling/11 - 011Modeling the Hood part 2.mp4 447MB
  102. 2 - Modeling/104 - 104Creating the truck bed door details from inside.mp4 444MB
  103. 2 - Modeling/47 - 047Putting the Hood Latch in place and use Data Transfer to fix the shading pro.mp4 441MB
  104. 2 - Modeling/60 - 060Creating the rear windshield rubber frame with the small middle window.mp4 438MB
  105. 2 - Modeling/31 - 031Creating the fender vents pattern.mp4 431MB
  106. 2 - Modeling/80 - 080Creating the foot step of the rear bumper.mp4 431MB
  107. 2 - Modeling/18 - 018Creating the bumper front cover and give it a thickness.mp4 430MB
  108. 2 - Modeling/117 - 117Closing the gap between the panels part 2.mp4 428MB
  109. 2 - Modeling/43 - 043Creating the windshield hold down rubber.mp4 427MB
  110. 2 - Modeling/26 - 026Finishing the Fender frame.mp4 424MB
  111. 2 - Modeling/116 - 116Closing the gap between the panels.mp4 418MB
  112. 2 - Modeling/6 - 006Creating the headlight details part 1.mp4 414MB
  113. 2 - Modeling/21 - 021Creating the bumpers bottom cover.mp4 408MB
  114. 2 - Modeling/172 - 172Craeting the Jeep logo.mp4 407MB
  115. 2 - Modeling/54 - 054Modeling the Handle and the door hinges bases.mp4 405MB
  116. 2 - Modeling/27 - 027Starting with Fender front light.mp4 402MB
  117. 2 - Modeling/145 - 145Moving the axle to the correct position and creating the spring.mp4 397MB
  118. 2 - Modeling/36 - 036Creating the Wiper base hatch.mp4 397MB
  119. 2 - Modeling/53 - 053Modeling the front door part 3.mp4 396MB
  120. 2 - Modeling/74 - 074Starting with the rear fender.mp4 394MB
  121. 2 - Modeling/84 - 084Creating the rear fender tail and the bumper Parking Assist Sensor.mp4 383MB
  122. 2 - Modeling/165 - 165Modeling the cargo roof light part 2.mp4 382MB
  123. 2 - Modeling/99 - 099Finishing the left side of the bed part 2.mp4 380MB
  124. 2 - Modeling/68 - 068Adding panels for the front side of the roof.mp4 378MB
  125. 2 - Modeling/83 - 083Creating the tail light and the license light cover for the rear bumper.mp4 377MB
  126. 2 - Modeling/90 - 090Starting with the bed interior.mp4 374MB
  127. 2 - Modeling/154 - 154Adding welding effect.mp4 373MB
  128. 2 - Modeling/123 - 123Modeling the tire part 3.mp4 368MB
  129. 2 - Modeling/141 - 141Modeling the axel details part 3.mp4 362MB
  130. 2 - Modeling/102 - 102Creating the truck bed tie down hook.mp4 352MB
  131. 2 - Modeling/137 - 137Making some tweaks.mp4 343MB
  132. 2 - Modeling/188 - 188Creating multiple materials for multiple objects.mp4 341MB
  133. 2 - Modeling/50 - 050Creating the doors panel.mp4 338MB
  134. 2 - Modeling/57 - 057Modeling the door lock and the handle pad.mp4 334MB
  135. 2 - Modeling/131 - 131Starting with the chassi.mp4 329MB
  136. 2 - Modeling/86 - 086Creating the trailer plug part 2.mp4 323MB
  137. 2 - Modeling/124 - 124 preparing and adding the array and simple deform mod to the tire.mp4 319MB
  138. 2 - Modeling/61 - 061Completing the rear side of the cabin.mp4 315MB
  139. 2 - Modeling/134 - 134Adding more details for the chassis part3.mp4 310MB
  140. 2 - Modeling/177 - 177Creating the exhaust and the spare tire.mp4 306MB
  141. 2 - Modeling/130 - 130Modeling the disk caliper.mp4 303MB
  142. 2 - Modeling/17 - 017Creating the Bumber lights cover.mp4 297MB
  143. 2 - Modeling/94 - 094Truck bed tweaking part 3.mp4 297MB
  144. 2 - Modeling/32 - 032Making some tweaks for the fender.mp4 288MB
  145. 2 - Modeling/19 - 019Bending the bumper and creating the Hook.mp4 287MB
  146. 2 - Modeling/105 - 105Making some tweaking to the truck bed floor.mp4 287MB
  147. 2 - Modeling/111 - 111Using shrinkwrap modifier on the windshield wipers.mp4 284MB
  148. 2 - Modeling/82 - 082Modeling the rear bumper hook.mp4 284MB
  149. 2 - Modeling/185 - 185Creating materials for the Rubicon Jeep Gladiator texts.mp4 284MB
  150. 2 - Modeling/182 - 182Creating a plastic material.mp4 280MB
  151. 2 - Modeling/42 - 042Shrinkwrap the Hood hinge on the hood and creating the head screw.mp4 280MB
  152. 2 - Modeling/20 - 020Creating a cover behind the bumper.mp4 278MB
  153. 2 - Modeling/184 - 184Creating the bumper material.mp4 273MB
  154. 2 - Modeling/106 - 106Creating the panel underneath the truck bed with some adjustment to the rear.mp4 270MB
  155. 2 - Modeling/3 - 003Adding The Reference Images.mp4 269MB
  156. 2 - Modeling/187 - 187Adding materials for the chassis and fender cover.mp4 268MB
  157. 2 - Modeling/166 - 166Starting modeling the front bumper shield pipe.mp4 267MB
  158. 2 - Modeling/189 - 189Creating materials for the head lights and roof lights.mp4 264MB
  159. 2 - Modeling/95 - 095Adding new panel at the end of the bed floor.mp4 262MB
  160. 2 - Modeling/118 - 118Mirroring the objects.mp4 261MB
  161. 2 - Modeling/169 - 169Modeling the radio antenna.mp4 258MB
  162. 2 - Modeling/157 - 157Starting with the doors side steps part 2.mp4 250MB
  163. 2 - Modeling/183 - 183Craeting black metal material for the roof and other objects.mp4 244MB
  164. 2 - Modeling/149 - 149Copying the front axle to the rear side and make some changes.mp4 242MB
  165. 2 - Modeling/8 - 008Completing the headlight and starting with the fender.mp4 237MB
  166. 2 - Modeling/176 - 176Distributing the bolts on the front bumper and creating the front fender log.mp4 237MB
  167. 2 - Modeling/115 - 115Creating the doors mirrors arms.mp4 235MB
  168. 2 - Modeling/180 - 180Car paint material.mp4 233MB
  169. 2 - Modeling/12 - 012Fixing some issues with the Hood.mp4 221MB
  170. 2 - Modeling/107 - 107Creating the windshield hinges.mp4 218MB
  171. 2 - Modeling/128 - 128Creating air valve caps.mp4 213MB
  172. 2 - Modeling/129 - 129Creating the brakes disk.mp4 213MB
  173. 2 - Modeling/175 - 175Creating new light for the front bumper.mp4 211MB
  174. 2 - Modeling/127 - 127Creating the wheel bolts.mp4 210MB
  175. 2 - Modeling/161 - 161Starting with the cabin roof.mp4 204MB
  176. 2 - Modeling/151 - 151creating cargo carrier above the truck bed par 2.mp4 200MB
  177. 2 - Modeling/171 - 171Creating the truck bed sensor.mp4 186MB
  178. 2 - Modeling/101 - 101Fixing the corner of the left side of the bed.mp4 182MB
  179. 2 - Modeling/16 - 016Optional video to watch fixing some issues with the Bumper.mp4 176MB
  180. 2 - Modeling/70 - 070Creating the Back driver side doors glass and rubber frame.mp4 163MB
  181. 2 - Modeling/173 - 173applaying the shrinkwrap technique on the text.mp4 153MB
  182. 2 - Modeling/178 - 178Preparing the environment and creating the ground texture.mp4 137MB
  183. 2 - Modeling/160 - 160Modeling the doors side steps part 5.mp4 137MB
  184. 2 - Modeling/181 - 181Adding orange peel effect for the material and create dark car paint.mp4 134MB
  185. 2 - Modeling/113 - 113Creating the truck bed rubber panel.mp4 132MB
  186. 2 - Modeling/25 - 025Using Shrinkwrap modifier to fix the fenders shading issue.mp4 123MB
  187. 2 - Modeling/179 - 179Organizing the scene.mp4 123MB
  188. 2 - Modeling/186 - 186Creating the Line X material for the truck bed.mp4 121MB
  189. 2 - Modeling/168 - 168Creating the fule door.mp4 105MB
  190. 2 - Modeling/28 - 028Finishing the back buckets of the light.mp4 102MB
  191. 1 - Introduction/2 - Before you start.mp4 49MB
  192. 1 - Introduction/1 - Introduction.mp4 34MB
  193. 3 - Resource/191 - Resource.html 55B