589689.xyz

[] Udemy - Tech Explorations™ Make an Open Source Drone

  • 收录时间:2019-11-23 14:54:00
  • 文件大小:5GB
  • 下载次数:103
  • 最近下载:2021-01-15 10:22:58
  • 磁力链接:
立即下载 复制链接

文件列表

  1. 13. An upgrade using the Pixhawk flight controller/12. 840i - Battery and power connections.mp4 417MB
  2. 2. Multi-copter drone basics/2. Types of multi-rotor drones.mp4 264MB
  3. 13. An upgrade using the Pixhawk flight controller/8. 840d - Assembly Part 4 - GPS antenna.mp4 247MB
  4. 13. An upgrade using the Pixhawk flight controller/2. 810 - Why upgrade- The Pixhawk flight controller.mp4 240MB
  5. 13. An upgrade using the Pixhawk flight controller/15. 860 - Calibration and test flight.mp4 221MB
  6. 13. An upgrade using the Pixhawk flight controller/11. 840g - Assembly Part 7 - Wirings.mp4 196MB
  7. 13. An upgrade using the Pixhawk flight controller/10. 840f - Assembly Part 6 - Buzzer, safety button, power module.mp4 189MB
  8. 13. An upgrade using the Pixhawk flight controller/7. 840c - Assembly Part 3 - Pixhawk base.mp4 175MB
  9. 13. An upgrade using the Pixhawk flight controller/6. 840b - Assembly Part 2 - ESC red wire insulation.mp4 169MB
  10. 13. An upgrade using the Pixhawk flight controller/13. 840h - Verify wiring in Mission Planner.mp4 164MB
  11. 13. An upgrade using the Pixhawk flight controller/4. 830 - A review of the upgrade components.mp4 164MB
  12. 13. An upgrade using the Pixhawk flight controller/14. 850 - Attach the propellers.mp4 163MB
  13. 4. Power distribution board assembly/4. Solder the battery wires and connectors.mp4 160MB
  14. 13. An upgrade using the Pixhawk flight controller/9. 840e - Assembly Part 5 - Pixhawk assembly.mp4 157MB
  15. 12. Test flight!/3. The first flight.mp4 146MB
  16. 13. An upgrade using the Pixhawk flight controller/5. 840a - Assembly Part 1 - Propellers.mp4 138MB
  17. 6. Flight controller and peripherals/10. Connect ESCs to flight controller.mp4 127MB
  18. 3. ESC and motors/3. Attach the connectors to the ESC wires.mp4 118MB
  19. 6. Flight controller and peripherals/5. Connect the GPS module to the flight controller, Part 1.mp4 102MB
  20. 9. The transmitter/3. Understand the transmitter basic operations.mp4 90MB
  21. 2. Multi-copter drone basics/8. Battery and charger, Part 1.mp4 83MB
  22. 6. Flight controller and peripherals/9. Attach flight controller to chassis.mp4 82MB
  23. 13. An upgrade using the Pixhawk flight controller/3. 820 - Disassembly.mp4 79MB
  24. 1. Introduction/1. What is this course about.mp4 79MB
  25. 7. Battery and charger/2. How to charge the battery.mp4 79MB
  26. 6. Flight controller and peripherals/4. Setup radio receiver and flight controller to use PWM.mp4 76MB
  27. 4. Power distribution board assembly/3. Solder the ESC power wires.mp4 71MB
  28. 11. Getting ready to fly/3. Attach the propellers.mp4 63MB
  29. 6. Flight controller and peripherals/8. Connect the GPS module to the flight controller, Part 4.mp4 60MB
  30. 2. Multi-copter drone basics/7. Propellers.mp4 59MB
  31. 13. An upgrade using the Pixhawk flight controller/1. 800 - Section introduction.mp4 59MB
  32. 12. Test flight!/2. Pre-flight checks.mp4 59MB
  33. 5. Main body assembly/3. Attach the arms to the power distribution board, Part 1.mp4 57MB
  34. 3. ESC and motors/4. Attach connectors to motor wires.mp4 57MB
  35. 7. Battery and charger/3. Attach the battery to the frame.mp4 52MB
  36. 2. Multi-copter drone basics/10. Flight controller and its peripherals.mp4 47MB
  37. 6. Flight controller and peripherals/3. The PWM and PPM signalling options, Part 2.mp4 43MB
  38. 2. Multi-copter drone basics/11. Other tools and things.mp4 42MB
  39. 6. Flight controller and peripherals/2. The PWM and PPM signalling options, Part 1.mp4 41MB
  40. 2. Multi-copter drone basics/9. Battery and charger, Part 2.mp4 41MB
  41. 2. Multi-copter drone basics/5. Procuring the right parts.mp4 40MB
  42. 11. Getting ready to fly/2. Calibrate the ESCs.mp4 37MB
  43. 5. Main body assembly/2. Attach the motors to the arms.mp4 36MB
  44. 2. Multi-copter drone basics/3. Roll, pitch, yaw.mp4 35MB
  45. 6. Flight controller and peripherals/6. Connect the GPS module to the flight controller, Part 2.mp4 32MB
  46. 5. Main body assembly/4. Attach the arms to the power distribution board, Part 2.mp4 31MB
  47. 3. ESC and motors/2. Preparation.mp4 31MB
  48. 2. Multi-copter drone basics/4. Controlling the motors.mp4 30MB
  49. 11. Getting ready to fly/4. Safety and legal issues.mp4 25MB
  50. 4. Power distribution board assembly/2. About the power distribution board.mp4 24MB
  51. 6. Flight controller and peripherals/7. Connect the GPS module to the flight controller, Part 3.mp4 22MB
  52. 10. Mission Planner/3. Mission Planner setup, Part 1.mp4 21MB
  53. 10. Mission Planner/2. Download and install Mission Planner.mp4 18MB
  54. 9. The transmitter/2. Binding receiver and transmitter.mp4 18MB
  55. 8. The firmware/2. Clear the EEPROM.mp4 14MB
  56. 2. Multi-copter drone basics/1. Introduction.mp4 14MB
  57. 10. Mission Planner/4. Mission Planner setup, Part 2.mp4 12MB
  58. 14. Conclusion/1. What's next.mp4 11MB
  59. 2. Multi-copter drone basics/6. Terminology.mp4 10MB
  60. 12. Test flight!/4. Conclusion.mp4 10MB
  61. 11. Getting ready to fly/1. Introduction.mp4 9MB
  62. 3. ESC and motors/5. Conclusion.mp4 8MB
  63. 8. The firmware/3. Download and install the firmware.mp4 8MB
  64. 10. Mission Planner/5. Test the GPS module.mp4 7MB
  65. 2. Multi-copter drone basics/12. Conclusion.mp4 7MB
  66. 6. Flight controller and peripherals/1. Introduction.mp4 6MB
  67. 3. ESC and motors/1. Introduction.mp4 6MB
  68. 6. Flight controller and peripherals/11. Conclusion.mp4 6MB
  69. 4. Power distribution board assembly/1. Introduction.mp4 6MB
  70. 5. Main body assembly/5. Conclusion.mp4 5MB
  71. 4. Power distribution board assembly/5. Conclusion.mp4 4MB
  72. 8. The firmware/1. Introduction.mp4 4MB
  73. 10. Mission Planner/1. Introduction.mp4 4MB
  74. 5. Main body assembly/1. Introduction.mp4 4MB
  75. 11. Getting ready to fly/1. Introduction.vtt 3MB
  76. 7. Battery and charger/1. Introduction.mp4 3MB
  77. 10. Mission Planner/6. Conclusion.mp4 3MB
  78. 9. The transmitter/4. Conclusion.mp4 2MB
  79. 8. The firmware/4. Conclusion.mp4 2MB
  80. 9. The transmitter/1. Introduction.mp4 2MB
  81. 12. Test flight!/1. Introduction.mp4 2MB
  82. 1. Introduction/2.1 Make an Open Source Drone - Parts used v2.pdf.pdf 2MB
  83. 11. Getting ready to fly/5. Conclusion.mp4 2MB
  84. 7. Battery and charger/4. Conclusion.mp4 2MB
  85. 1. Introduction/2.2 Make an Open Source Drone - Tools used.pdf.pdf 1MB
  86. 12. Test flight!/2.1 Make an Open Source Drone - Preflight Check.pdf.pdf 29KB
  87. 11. Getting ready to fly/2.1 Make an Open Source Drone - ESC calibration process.pdf.pdf 29KB
  88. 2. Multi-copter drone basics/5. Procuring the right parts.vtt 16KB
  89. 11. Getting ready to fly/4. Safety and legal issues.vtt 14KB
  90. 13. An upgrade using the Pixhawk flight controller/12. 840i - Battery and power connections.vtt 14KB
  91. 4. Power distribution board assembly/4. Solder the battery wires and connectors.vtt 12KB
  92. 13. An upgrade using the Pixhawk flight controller/2. 810 - Why upgrade- The Pixhawk flight controller.vtt 12KB
  93. 2. Multi-copter drone basics/2. Types of multi-rotor drones.vtt 11KB
  94. 7. Battery and charger/2. How to charge the battery.vtt 11KB
  95. 3. ESC and motors/3. Attach the connectors to the ESC wires.vtt 10KB
  96. 2. Multi-copter drone basics/8. Battery and charger, Part 1.vtt 9KB
  97. 6. Flight controller and peripherals/10. Connect ESCs to flight controller.vtt 9KB
  98. 13. An upgrade using the Pixhawk flight controller/13. 840h - Verify wiring in Mission Planner.vtt 9KB
  99. 2. Multi-copter drone basics/7. Propellers.vtt 9KB
  100. 9. The transmitter/3. Understand the transmitter basic operations.vtt 8KB
  101. 6. Flight controller and peripherals/5. Connect the GPS module to the flight controller, Part 1.vtt 8KB
  102. 13. An upgrade using the Pixhawk flight controller/15. 860 - Calibration and test flight.vtt 8KB
  103. 13. An upgrade using the Pixhawk flight controller/8. 840d - Assembly Part 4 - GPS antenna.vtt 8KB
  104. 6. Flight controller and peripherals/3. The PWM and PPM signalling options, Part 2.vtt 8KB
  105. 2. Multi-copter drone basics/9. Battery and charger, Part 2.vtt 8KB
  106. 10. Mission Planner/4. Mission Planner setup, Part 2.vtt 7KB
  107. 2. Multi-copter drone basics/6. Terminology.vtt 7KB
  108. 13. An upgrade using the Pixhawk flight controller/4. 830 - A review of the upgrade components.vtt 7KB
  109. 6. Flight controller and peripherals/9. Attach flight controller to chassis.vtt 7KB
  110. 6. Flight controller and peripherals/4. Setup radio receiver and flight controller to use PWM.vtt 7KB
  111. 13. An upgrade using the Pixhawk flight controller/11. 840g - Assembly Part 7 - Wirings.vtt 7KB
  112. 10. Mission Planner/3. Mission Planner setup, Part 1.vtt 6KB
  113. 11. Getting ready to fly/3. Attach the propellers.vtt 6KB
  114. 12. Test flight!/3. The first flight.vtt 6KB
  115. 13. An upgrade using the Pixhawk flight controller/7. 840c - Assembly Part 3 - Pixhawk base.vtt 6KB
  116. 13. An upgrade using the Pixhawk flight controller/10. 840f - Assembly Part 6 - Buzzer, safety button, power module.vtt 6KB
  117. 13. An upgrade using the Pixhawk flight controller/9. 840e - Assembly Part 5 - Pixhawk assembly.vtt 6KB
  118. 2. Multi-copter drone basics/11. Other tools and things.vtt 6KB
  119. 13. An upgrade using the Pixhawk flight controller/6. 840b - Assembly Part 2 - ESC red wire insulation.vtt 6KB
  120. 13. An upgrade using the Pixhawk flight controller/14. 850 - Attach the propellers.vtt 6KB
  121. 2. Multi-copter drone basics/4. Controlling the motors.vtt 5KB
  122. 13. An upgrade using the Pixhawk flight controller/5. 840a - Assembly Part 1 - Propellers.vtt 5KB
  123. 2. Multi-copter drone basics/3. Roll, pitch, yaw.vtt 5KB
  124. 5. Main body assembly/3. Attach the arms to the power distribution board, Part 1.vtt 5KB
  125. 11. Getting ready to fly/2. Calibrate the ESCs.vtt 5KB
  126. 7. Battery and charger/3. Attach the battery to the frame.vtt 5KB
  127. 6. Flight controller and peripherals/2. The PWM and PPM signalling options, Part 1.vtt 4KB
  128. 2. Multi-copter drone basics/10. Flight controller and its peripherals.vtt 4KB
  129. 14. Conclusion/2. Other educational content from Tech Explorations.html 4KB
  130. 10. Mission Planner/2. Download and install Mission Planner.vtt 4KB
  131. 12. Test flight!/2. Pre-flight checks.vtt 4KB
  132. 4. Power distribution board assembly/3. Solder the ESC power wires.vtt 4KB
  133. 1. Introduction/1. What is this course about.vtt 4KB
  134. 3. ESC and motors/4. Attach connectors to motor wires.vtt 4KB
  135. 3. ESC and motors/2. Preparation.vtt 3KB
  136. 8. The firmware/3. Download and install the firmware.vtt 3KB
  137. 5. Main body assembly/2. Attach the motors to the arms.vtt 3KB
  138. 13. An upgrade using the Pixhawk flight controller/3. 820 - Disassembly.vtt 3KB
  139. 6. Flight controller and peripherals/8. Connect the GPS module to the flight controller, Part 4.vtt 3KB
  140. 9. The transmitter/2. Binding receiver and transmitter.vtt 3KB
  141. 13. An upgrade using the Pixhawk flight controller/1. 800 - Section introduction.vtt 3KB
  142. 5. Main body assembly/4. Attach the arms to the power distribution board, Part 2.vtt 2KB
  143. 8. The firmware/2. Clear the EEPROM.vtt 2KB
  144. 4. Power distribution board assembly/2. About the power distribution board.vtt 2KB
  145. 2. Multi-copter drone basics/1. Introduction.vtt 2KB
  146. 6. Flight controller and peripherals/6. Connect the GPS module to the flight controller, Part 2.vtt 2KB
  147. 6. Flight controller and peripherals/7. Connect the GPS module to the flight controller, Part 3.vtt 2KB
  148. 14. Conclusion/1. What's next.vtt 2KB
  149. 6. Flight controller and peripherals/1. Introduction.vtt 1KB
  150. 10. Mission Planner/5. Test the GPS module.vtt 1KB
  151. 2. Multi-copter drone basics/12. Conclusion.vtt 1KB
  152. 6. Flight controller and peripherals/11. Conclusion.vtt 1KB
  153. 3. ESC and motors/5. Conclusion.vtt 1KB
  154. 8. The firmware/2.1 EEPROM_clear.zip.zip 958B
  155. 12. Test flight!/4. Conclusion.vtt 920B
  156. 5. Main body assembly/5. Conclusion.vtt 848B
  157. 8. The firmware/1. Introduction.vtt 818B
  158. 1. Introduction/3. Crius or Pixhawk Read this before you continue.html 736B
  159. 4. Power distribution board assembly/1. Introduction.vtt 730B
  160. 10. Mission Planner/1. Introduction.vtt 698B
  161. 3. ESC and motors/1. Introduction.vtt 656B
  162. 5. Main body assembly/1. Introduction.vtt 606B
  163. 9. The transmitter/1. Introduction.vtt 594B
  164. 10. Mission Planner/6. Conclusion.vtt 565B
  165. 8. The firmware/4. Conclusion.vtt 537B
  166. 9. The transmitter/4. Conclusion.vtt 535B
  167. 4. Power distribution board assembly/5. Conclusion.vtt 514B
  168. 11. Getting ready to fly/5. Conclusion.vtt 463B
  169. 12. Test flight!/1. Introduction.vtt 411B
  170. 7. Battery and charger/4. Conclusion.vtt 379B
  171. 7. Battery and charger/1. Introduction.vtt 371B
  172. 1. Introduction/2. Parts and Tools.html 271B
  173. [Tutorialsplanet.NET].url 128B
  174. 1. Introduction/2.3 List of tools and parts.html 108B