589689.xyz

Mastering STM32CubeMX 5 and CubeIDE - Embedded Systems

  • 收录时间:2021-04-23 09:17:45
  • 文件大小:4GB
  • 下载次数:1
  • 最近下载:2021-04-23 09:17:45
  • 磁力链接:
立即下载 复制链接

文件列表

  1. 2. Developing General Purpose InputOutput Drivers and Firmware/1. Coding an InputOuput Driver.mp4 311MB
  2. 4. Developing General Purpose Timers Drivers and Firmware/1. Coding a Hardware Timer to generate precise Delays.mp4 228MB
  3. 3. Embedded Systems Bare-Metal Embedded-C and Assembly Programming with CubeIDE/1. Coding Gpio Drivers From Scratch Using Datasheet Information (Part I).mp4 194MB
  4. 9. Developing Real-time Firmware with FreeRTOS/2. Coding Accessing Hardware Drivers from Multiple Threads.mp4 185MB
  5. 8. Developing Universal Serial Bus ( USB) Drivers and Firmware/2. Coding USB Drivers for Human Interface Device (HID) - Mouse Functionality.mp4 170MB
  6. 7. Developing Universal Asynchronous Receiver-Transmitter ( UART ) Drivers/4. Coding Multiple UART Modules.mp4 158MB
  7. 8. Developing Universal Serial Bus ( USB) Drivers and Firmware/3. Coding USB Drivers for Human Interface Device (HID) - Keyboard Functionality.mp4 153MB
  8. 9. Developing Real-time Firmware with FreeRTOS/1. Coding Experimenting with Tasks and Priorities.mp4 143MB
  9. 3. Embedded Systems Bare-Metal Embedded-C and Assembly Programming with CubeIDE/6. Converting Keil MDK ARM Assembly Syntax to GCC Assembly Syntax.mp4 143MB
  10. 8. Developing Universal Serial Bus ( USB) Drivers and Firmware/5. Coding USB Drivers for Virtual Com Port Functionality (RX and TX ).mp4 140MB
  11. 4. Developing General Purpose Timers Drivers and Firmware/2. Coding a Hardware Timer Driver for Output Compare Functionality.mp4 136MB
  12. 5. Developing Analog-to-Digital Conversion (ADC) Drivers and Firmware/5. Coding an ADC Driver for Multi-Channel DMA Scan Mode.mp4 134MB
  13. 2. Developing General Purpose InputOutput Drivers and Firmware/2. Coding an Input Interrupt Driver.mp4 133MB
  14. 3. Embedded Systems Bare-Metal Embedded-C and Assembly Programming with CubeIDE/4. Coding Gpio Drivers From Scratch In Assembly Language (Part I).mp4 130MB
  15. 7. Developing Universal Asynchronous Receiver-Transmitter ( UART ) Drivers/2. Coding UART Drivers for Interupt Transfer Mode.mp4 128MB
  16. 7. Developing Universal Asynchronous Receiver-Transmitter ( UART ) Drivers/1. Coding UART Drivers for Polling Transfer Mode.mp4 123MB
  17. 3. Embedded Systems Bare-Metal Embedded-C and Assembly Programming with CubeIDE/5. Coding Gpio Drivers From Scratch In Assembly Language (Part II).mp4 122MB
  18. 3. Embedded Systems Bare-Metal Embedded-C and Assembly Programming with CubeIDE/2. Coding Gpio Drivers From Scratch Using Datasheet Information (Part II).mp4 119MB
  19. 1. Introduction/5. Overview of STM32CubeMX 5.mp4 110MB
  20. 9. Developing Real-time Firmware with FreeRTOS/5. Coding Sending Notifications Between Threads.mp4 106MB
  21. 3. Embedded Systems Bare-Metal Embedded-C and Assembly Programming with CubeIDE/3. Coding ARM Assembly Applications in CubeIDE.mp4 106MB
  22. 9. Developing Real-time Firmware with FreeRTOS/4. Coding Creating Threads Manually.mp4 102MB
  23. 5. Developing Analog-to-Digital Conversion (ADC) Drivers and Firmware/1. Coding an ADC Driver for Single Conversion Mode.mp4 101MB
  24. 5. Developing Analog-to-Digital Conversion (ADC) Drivers and Firmware/2. Coding an ADC Driver for Continuous Mode Conversion.mp4 89MB
  25. 2. Developing General Purpose InputOutput Drivers and Firmware/3. Coding an Input Interrupt Driver (Multiple Inputs).mp4 77MB
  26. 6. Developing Serial Peripheral Interface ( SPI ) Drivers and Firmware/1. Coding SPI Drivers for Polling Transfer Mode.mp4 69MB
  27. 4. Developing General Purpose Timers Drivers and Firmware/5. Coding a Hardware Timer Driver for Generating Precise Interrupts.mp4 67MB
  28. 6. Developing Serial Peripheral Interface ( SPI ) Drivers and Firmware/2. Coding SPI Drivers for Interrupt Transfer Mode.mp4 64MB
  29. 4. Developing General Purpose Timers Drivers and Firmware/3. Coding a Hardware Timer Driver for Counting Events.mp4 64MB
  30. 8. Developing Universal Serial Bus ( USB) Drivers and Firmware/4. Coding USB Drivers for Virtual Com Port Functionality (TX Only).mp4 63MB
  31. 5. Developing Analog-to-Digital Conversion (ADC) Drivers and Firmware/3. Coding an ADC Driver for Interrupt Conversion Mode.mp4 59MB
  32. 5. Developing Analog-to-Digital Conversion (ADC) Drivers and Firmware/4. Coding an ADC Driver for Single-Channel DMA Mode.mp4 56MB
  33. 7. Developing Universal Asynchronous Receiver-Transmitter ( UART ) Drivers/3. Coding UART Drivers for DMA Transfer Mode.mp4 50MB
  34. 4. Developing General Purpose Timers Drivers and Firmware/4. Coding a Hardware Timer Driver for Generating PWM Signals.mp4 49MB
  35. 1. Introduction/3. Installing CubeMX 5 and CubeIDE.mp4 49MB
  36. 9. Developing Real-time Firmware with FreeRTOS/3. Coding Accessing Hardware Drivers from Multiple Threads using a MUTEX.mp4 44MB
  37. 5. Developing Analog-to-Digital Conversion (ADC) Drivers and Firmware/1.1 6_ADC_Single_Conversion_Mode.mp4 44MB
  38. 1. Introduction/1. Introduction (Same as Promo Video).mp4 42MB
  39. 1. Introduction/4. Installing CubeMX 5 Packages.mp4 42MB
  40. 6. Developing Serial Peripheral Interface ( SPI ) Drivers and Firmware/3. Coding SPI Drivers for DMA Transfer Mode.mp4 40MB
  41. 1. Introduction/2. Download CubeMX 5 and CubeIDE.mp4 30MB
  42. 1. Introduction/6. Overview of the Clock Configuration Tab.mp4 30MB
  43. 8. Developing Universal Serial Bus ( USB) Drivers and Firmware/1. Understanding the USB capabilities of different dev boards.mp4 17MB
  44. 10. Closing Remarks/1. Closing.mp4 3MB
  45. 2. Developing General Purpose InputOutput Drivers and Firmware/1. Coding an InputOuput Driver.srt 51KB
  46. 3. Embedded Systems Bare-Metal Embedded-C and Assembly Programming with CubeIDE/1. Coding Gpio Drivers From Scratch Using Datasheet Information (Part I).srt 47KB
  47. 4. Developing General Purpose Timers Drivers and Firmware/1. Coding a Hardware Timer to generate precise Delays.srt 41KB
  48. 3. Embedded Systems Bare-Metal Embedded-C and Assembly Programming with CubeIDE/4. Coding Gpio Drivers From Scratch In Assembly Language (Part I).srt 30KB
  49. 8. Developing Universal Serial Bus ( USB) Drivers and Firmware/2. Coding USB Drivers for Human Interface Device (HID) - Mouse Functionality.srt 29KB
  50. 7. Developing Universal Asynchronous Receiver-Transmitter ( UART ) Drivers/4. Coding Multiple UART Modules.srt 29KB
  51. 5. Developing Analog-to-Digital Conversion (ADC) Drivers and Firmware/5. Coding an ADC Driver for Multi-Channel DMA Scan Mode.srt 27KB
  52. 7. Developing Universal Asynchronous Receiver-Transmitter ( UART ) Drivers/1. Coding UART Drivers for Polling Transfer Mode.srt 27KB
  53. 7. Developing Universal Asynchronous Receiver-Transmitter ( UART ) Drivers/2. Coding UART Drivers for Interupt Transfer Mode.srt 25KB
  54. 3. Embedded Systems Bare-Metal Embedded-C and Assembly Programming with CubeIDE/2. Coding Gpio Drivers From Scratch Using Datasheet Information (Part II).srt 25KB
  55. 3. Embedded Systems Bare-Metal Embedded-C and Assembly Programming with CubeIDE/3. Coding ARM Assembly Applications in CubeIDE.srt 25KB
  56. 9. Developing Real-time Firmware with FreeRTOS/1. Coding Experimenting with Tasks and Priorities.srt 25KB
  57. 3. Embedded Systems Bare-Metal Embedded-C and Assembly Programming with CubeIDE/6. Converting Keil MDK ARM Assembly Syntax to GCC Assembly Syntax.srt 24KB
  58. 1. Introduction/5. Overview of STM32CubeMX 5.srt 24KB
  59. 9. Developing Real-time Firmware with FreeRTOS/2. Coding Accessing Hardware Drivers from Multiple Threads.srt 24KB
  60. 8. Developing Universal Serial Bus ( USB) Drivers and Firmware/5. Coding USB Drivers for Virtual Com Port Functionality (RX and TX ).srt 23KB
  61. 8. Developing Universal Serial Bus ( USB) Drivers and Firmware/3. Coding USB Drivers for Human Interface Device (HID) - Keyboard Functionality.srt 23KB
  62. 3. Embedded Systems Bare-Metal Embedded-C and Assembly Programming with CubeIDE/5. Coding Gpio Drivers From Scratch In Assembly Language (Part II).srt 23KB
  63. 2. Developing General Purpose InputOutput Drivers and Firmware/2. Coding an Input Interrupt Driver.srt 22KB
  64. 4. Developing General Purpose Timers Drivers and Firmware/2. Coding a Hardware Timer Driver for Output Compare Functionality.srt 20KB
  65. 5. Developing Analog-to-Digital Conversion (ADC) Drivers and Firmware/2. Coding an ADC Driver for Continuous Mode Conversion.srt 19KB
  66. 9. Developing Real-time Firmware with FreeRTOS/5. Coding Sending Notifications Between Threads.srt 16KB
  67. 5. Developing Analog-to-Digital Conversion (ADC) Drivers and Firmware/1. Coding an ADC Driver for Single Conversion Mode.srt 15KB
  68. 6. Developing Serial Peripheral Interface ( SPI ) Drivers and Firmware/1. Coding SPI Drivers for Polling Transfer Mode.srt 14KB
  69. 9. Developing Real-time Firmware with FreeRTOS/4. Coding Creating Threads Manually.srt 14KB
  70. 4. Developing General Purpose Timers Drivers and Firmware/5. Coding a Hardware Timer Driver for Generating Precise Interrupts.srt 14KB
  71. 6. Developing Serial Peripheral Interface ( SPI ) Drivers and Firmware/2. Coding SPI Drivers for Interrupt Transfer Mode.srt 13KB
  72. 8. Developing Universal Serial Bus ( USB) Drivers and Firmware/4. Coding USB Drivers for Virtual Com Port Functionality (TX Only).srt 13KB
  73. 5. Developing Analog-to-Digital Conversion (ADC) Drivers and Firmware/4. Coding an ADC Driver for Single-Channel DMA Mode.srt 12KB
  74. 2. Developing General Purpose InputOutput Drivers and Firmware/3. Coding an Input Interrupt Driver (Multiple Inputs).srt 12KB
  75. 4. Developing General Purpose Timers Drivers and Firmware/3. Coding a Hardware Timer Driver for Counting Events.srt 12KB
  76. 5. Developing Analog-to-Digital Conversion (ADC) Drivers and Firmware/3. Coding an ADC Driver for Interrupt Conversion Mode.srt 12KB
  77. 7. Developing Universal Asynchronous Receiver-Transmitter ( UART ) Drivers/3. Coding UART Drivers for DMA Transfer Mode.srt 11KB
  78. 4. Developing General Purpose Timers Drivers and Firmware/4. Coding a Hardware Timer Driver for Generating PWM Signals.srt 10KB
  79. 1. Introduction/6. Overview of the Clock Configuration Tab.srt 8KB
  80. 1. Introduction/3. Installing CubeMX 5 and CubeIDE.srt 8KB
  81. 6. Developing Serial Peripheral Interface ( SPI ) Drivers and Firmware/3. Coding SPI Drivers for DMA Transfer Mode.srt 8KB
  82. 1. Introduction/4. Installing CubeMX 5 Packages.srt 7KB
  83. 9. Developing Real-time Firmware with FreeRTOS/3. Coding Accessing Hardware Drivers from Multiple Threads using a MUTEX.srt 7KB
  84. 1. Introduction/1. Introduction (Same as Promo Video).srt 6KB
  85. 1. Introduction/2. Download CubeMX 5 and CubeIDE.srt 4KB
  86. 8. Developing Universal Serial Bus ( USB) Drivers and Firmware/1. Understanding the USB capabilities of different dev boards.srt 3KB
  87. 10. Closing Remarks/1. Closing.srt 561B